KARNDEAN Universal Adhesive 5 LITRE (20M2)

£43.99 inc. VAT

KARNDEAN UNIVERSAL ADHESIVE 5 LITRE (20M²)


A resin-free fibre-reinforced wet-bed high-temperature dispersion adhesive for use indoors. It’s perfect for bonding Designflooring products on most absorbent surfaces, as long as it’s level, absorbent and sound. It’s easy to apply, has good open time and “grab”, and reduces residual indentation for all round better results.


Features:

  • Good grab.
  • Good shear resistance.
  • Odourless throughout application.
  • Solvent free.
  • Very low VOC emissions.

Material:

Polystyrene, polyacrylate dispersions, thickeners, wetting and defoaming agents, preservatives, fibres, mineral fillers and water.


Technical properties:

  • Open time for tiles/ planks (26°C): 5 minutes.
  • Set time for traffic (26°C): After 24 hours.
  • Final strength (26°C): After 3 days.
  • Working temperature (minimum/ optimum): 15°C/ 18–26°C.
This product is associated with the following NBS Create clause:
45-50-00/310 Acrylic and methacrylate adhesives

 


Using the correct tools

When using our adhesives it is important to use an appropriate adhesive trowel or roller, along with the proper Karndean Designflooring adhesive.


Underfloor Heating

It is possible to install Karndean products over floors incorporating underfloor heating, but these must be insulated to ensure the surface temperature throughout the installation does not exceed 80°F. The heating must be switched off 48 hours before, during, and for 48 hours following the installation, then gradually increase to working temperature.

 

lead-time

brand